Changing doors
The lambo doors might look very extreme, but it’s just about changing the hinges and adding a gas-pressurized shock absorbers. It also requires few welds under the car. And he alignment is essential.
The most important steps of this task are:
1) Remove the doors of the car.
2) Remove the original hinges.
3) Measure the wiring to ensure that new measures serve, Lambo door opens and moves to 90 degrees, so that the cables must meet the new distance.
4) Test the door before the new movement.
5) You might need a different hinge, use the elements of the kit.
6) The new hinge essentially achieves the desired motion. Carefully test movements.
7) With a buffer pressure can hold the door for every move and new position. It avoids the fall of it. 
Lambo door no longer opens more horizontally as it comes in the car factory, the system requires another lock to make it open vertically.
9) This may need to cut some original profile.
10) It is very important to test the door several times, checking the operation of the damper, closing the positions. Review all attachments, especially the welds.
11) The task is equal for each side of the car, be sure to bring the work order and neatness. Carefully review each modification.
12) The painting requires finishing touches. The kits provide all this.